A problem that has emerged in the forums is battery failure when using recuperation. The Stromer battery seems to have a localized issue with the relatively high currents that occur during steeper and longer downhill rides with a high recuperation level. Although the recuperation current is limited to 15 A, it exceeds the maximum permissible charging current of a single cell.<\/p>\n\n\n\n
Example: The BQ983 battery (cell configuration 13S6P) uses Sanyo NCR 18650 GA cells. This cell has a nominal charging current of 1.675 A. With a regeneration current of 15 A, 2.5 A are \u201epushed\u201c into the cell per cell strand (15 A \/ 6). This is thus 50 % above the recommended charging current.<\/p>\n\n\n\n
The problem is further exacerbated by cold temperatures or an older battery. What exactly goes wrong with the batteries is unknown to me \u2013 but presumably it's the BMS. Since this is proprietary to Stromer HTE<\/a> (TD Hitech Energy) and. SMP<\/a> (Simplo) was manufactured and programmed, it cannot be bought individually. The company upVolt<\/a> In Basel, BMS does not repair them, but replaces them with units from the recycling loop. The company Buenzlibatteries<\/a> also advertises the repair of BMS on its website.<\/p>\n\n\n\n