ABS The ABS used by Stromer comes from the Italian manufacturer Blubrake. It was first offered on the ST5 model from 2021 and...
Brakes - General There can be a lot of discussion about brake systems on S-Pedelecs. Whether brand A or B, whether 2 or 4 piston brakes, whether sintered...
Brake in / burn in brakes Both sintered and resin pads (organic pads) must be braked in order to achieve optimum braking performance and the lowest possible noise level....
Bleeding the brakes / ABS problems If the brake lever can be pulled all the way to the handlebars and the brake has little or no effect, this is...
Brake adjustment and resetting The brake pistons are located in the brake calliper. The hydraulic brake pressure, which is transmitted via the brake fluid, pushes the brake pistons out. The pistons press...
Brake oil Stromer uses brakes from TRP (Tektro Racing Products). Older models also had brakes from Shimano (Deore, SLX, XT) or Magura...
Spare parts: Pads, disks, levers etc. Stromer only uses brakes from the Taiwanese manufacturer TRP (Tektro Racing Products) on the newer models. These brakes are designed for Stromer...
Adjusting the reach of the brake lever The distance from the brake lever to the handlebars can be adjusted (Reach Adjust). To do this, take an Allen key and turn to the left...
Squeak > See BRAKES - 'Brake in/burn in' > See PROBLEMS - BRAKES - 'Squealing' > Solving the problem with the brakes -...
Set reed contacts A reed contact is fitted to each brake lever to control the brake light and recuperation via the brake levers. To...