Stromer instructions / How to videos

Instructions

VIDEOS

TMM sensor replacement P179 with P211 (Gen 2)

TMM Sensor Cleaning / Calibration ST2 Belt

Calibrate TMM sensor (EN)

Battery cover: Update 402282G - Stromer ST1 & ST2

Charging the Shimano Di2 battery / ST5 (old location of the charging socket)

Fitting the freewheel ST3 / ST5

Disassembly/assembly rear wheel ST3 / ST5

Remove rear wheel ST2 Belt

ST2 Belt - Performance Kit - 403956 (Silencer / Snubber)

Ölwechsel Pinion C-Linie / Oil Change Pinion C-Line

TRP - Quick brake release

TRP - Mobilize brake pistons

ST5 - Replace front wheel bearing DT Swiss rim

Tools: Puller, amazon; (Alternative address)| Bearing press | Ball bearing
ST5: T-trade | Bearing Puller, Extension Type for bearing: 15x28x7 mm

Video: Wheel bearing replacement step by step on an ST5

Tip: The bearings can also be fitted with a Hot air dryer from the bearing mounts. Aluminum has a far greater coefficient of thermal expansion than steel. If the hub is heated vigorously on the outside, it expands more than the bearing. Ideally, they will tumble out of the hub by themselves. Conversely, the bearings can be placed in the freezer before fitting.

ST5 Pinion Stromer sound samples (click link)

https://youtu.be/p3I1OgLcD6M?si=g_zXoV8nTLT_Cw6E

WREN USD fork adjustment (ST3/ST5)