Handlebar conversion - ST3 Pinion

Stromer offers different handlebar variants for the ST3. This means that customer requirements can be better met.

For those who want to have it a little more comfortable, or have to have it for medical reasons, there is the variant of the Stromerfahrer ‚Edwin Ingrid Brantjes Luijting' recommended. For medical reasons, he had to look for a handlebar that would allow him to sit in a more upright position. He found what he was looking for at Rosebikes.nl with the Ergotec 70 Riser Bar (Rise=70mm; Back Sweep=12°). Both ends were shortened by 6 cm because the handlebars were too wide at 780 mm and the cabling was not long enough. Furthermore, the ends were Ergon Gp5 L grips and on the left a Mirage bicycle mirror Minor Bar-End E-Bike 50 mm left/right mounted.

> See also: Frame and handlebar geometry - Terms