In the Omni C, there are two bar graphs. One runs from right to left – the display for support strength, the other from left to right for the strength of braking through recuperation.
It takes up a maximum of two-thirds of the display width and changes from gray to red when it reaches its respective maximum value.
The display of assistance helps you drive more economically and thus achieve greater range. The longer the bar, the greater the energy flow to the motor and thus the assistance.
The display of the recuperation effect is triggered on the one hand by the brake levers, and on the other hand by classic recuperation or recuperation via the „Cruise Control“ mode. How exactly the different recuperation modes „Classic Recuperation“ and „Cruise Control“ work, what their advantages and disadvantages are, and what is worth knowing can be found in the chapter BRAKING → 'Recuperation and recuperation'